Dell EqualLogic PS6110X Virtualized iSCSI SAN Storage Array 2x Ctrls 1.75TB HDD

Description

Dell EqualLogic PS6110X Virtualized iSCSI SAN Storage Array 2x Ctrls 1.75TB HDD
With 1.75TB SAS HDD's
In Good Condition, Full Working Order
Includes:
1 x Dell EqualLogic PS6110x Virtualized iSCSI SAN Storage Array
2 x Control Module 14 Orange Label
Each With:
1 x 10GbE SFP+ Port
1 x 10GBase-T Port
1 x 10/100Mb Management Port
4Gb Cache
Support For RAID 5,6,10 And 50
19 x 73GB 10k SAS Hard Drive
3 x 73GB 15k SAS Hard Drive
1 x 72GB 10k SAS Hard Drive
1 x 72GB 15k SAS Hard Drive
2 x 700w Power Supplies 0R0C2G
1 x Front Bezel
Specification:
Product Configurations
Storage Controllers
Dual controllers with 4GB non-volatile memory per controller
Hard Disk Drives
Twenty-four (24) 10K SAS (or SAS SED) hot-pluggable hard disk drives
Drive Capacities
2.5” 10K SAS drives available in 600GB, 900GB, and 1.2TB (900GB also available in SAS SED)
System Capacities
Up to 28.8TB
Technical Highlights
Volumes
Up to 1,024
Snapshots
512 per volume / up to 10,000 total per group
Volume Connections
Up to 1,024
Host Protocol
Any standards-compliant iSCSI initiator
Operating Systems Supported
Microsoft® Windows Server® including Hyper-V®
VMware® ESX Server™
Red Hat® Enterprise Linux® (RHEL)
SUSE® Enterprise Linux® (SLES)
Oracle® Linux
Oracle® Solaris™
IBM® AIX®
HP-UX
Mac OS® X
Citrix® XenServer®
Novell® NetWare®
RAID Support
RAID 5, RAID 6, RAID 10, and RAID 50
10GbE Network Interfaces
Management network: One 100BASE-TX per controller
Interface ports: One 10GBASE-T with RJ45 and one 10GbE SFP+ for fibre or twin-ax copper cabling
TCP Network Support
IPv4, IPv6 core support
Expansion Option
Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group.
Reliability
Redundant hot-swappable controllers with vertical port sharing
Hot-swappable disks and power supplies
Enclosure Monitoring System
Automatic spare configuration and utilization
SMART
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive
Management
SAN Headquarters multi-group performance and event monitoring tool
Serial console
Ability to configure a separate management network
SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
Multi-administrator support
Security
CHAP authentication
Access control for iSCSI
Access control for management interfaces including Active Directory, LDAP, or RADIUS support
Notification Methods
SNMP traps, e-mail, syslog
Power
AC voltage:
100-240 VAC ±10% single phase
Frequency:
50/60 Hz
Power factor:
0.98 (minimum)
Power supplies:
Dual 700 W
Chassis
Height:
2U / 87 mm (3.42 inches)
Width:
446 mm (17.57 inches)
Depth:
546 mm (21.50 inches)
Weight:
24.1 kg (53.0 lbs)
Packaged physical:
Length: 851 mm (33.50 inches) Width: 616 mm (24.25 inches) Depth: 508 mm (20.00 inches)
Packaged weight:
53.32 kg (117.30 lbs)
Rack Support
ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks
Environmental Operating Conditions
Temperature range:
5° to 40°C (41° to 104°F)
Storage temperature:
–40° to 65°C (–40° to 149°F)
Altitude:
For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.
Operating Relative humidity:
20% to 80% (noncondensing) with a maximum humidity gradation
of 10% per hour
Operational shock:
Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only
Operating Vibration:
0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations
Acoustics Category 4:
<=7.2 bels at 23C +/- 2C
Air Quality:
Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
CS 171207 R10 B1 Bott dup .co.uk